Smart™ X36T comes with two control methods: self-control and DMX control. Under self-control, it will work under the pre-programmed lighting effect; While under DMX control, Smart™ X36T will be compatible with any DMX512 console to meet lighting designers’ specific lighting-effect requirements.

Features & Benefits:
Emit higher brightness at lower cost with 36pcs of ultra bright LEDs (1 W);
Meet your specific lighting-effect requirements with a total amount of 16,777,216 different colors;
Ease of directing the light to the right spot with 180° rotary angle;
With mounting gears and rotating for your easy installation and removal;
RGB color-changing modes controlled by our DMX console;
Long life span of over 50,000 hours with high quality LEDs;
IP65 degree, perfect for both indoor and outdoor applications.

Recommended Applications:
Building facade lighting (grazing lighting, flooding lighting, washing lighting) for mansions, theaters, casinos, bridges, hotels and shopping centers;
Indoor wash lighting for special events, concerts, clubs, hotels, theaters;
Landscape lighting for gardens, theme parks and entertainment plazas.

Custom Design Service:
Colors: red, yellow, blue, green, white, pink and violet etc.
Operation Voltage: 24VDC available as per request.
Waterproof Treatment: yes

Smart™ X36T for Building Facade Lighting

Lighting the building’s facade adds its beauty and creates a good first impression. So it’s very important to make your building stand out especially for commercial purpose. Smart™ X36T gives you the solution.  With IP65 rating, it is good for outdoor applications.
Smart™ X36T can change colors synchronously or asynchronously in master/slave mode.

Beautiful facade lighting makes your building stand out, it’s also important  to make your building look as good inside as out. Smart™ X36T is also perfect for inside decorations in your clubs, shops, hotels, theaters and other special events.

Smart™ X36T is compatible with most DMX consoles and can meet lighting designers’ request. Smart™ X36T for Indoor Wash Lighting

Smart™ X36T for Landscape Lighting

Part Numbers

Technical Specifications

Physical Specifications

Electrical Specifications

Optical Specifications

oSignage™ X1 is square aluminum housing, with 1 High Power LEDs in, and available in solid colors. This thermal management makes the oSignage™ X1 high electrical-optic efficiency.
oSignage™ X1 can be cut at every 3 pcs to fit many applications; installed easily with 3M double-sided tape on the back or mounting holes. oSignage™ X1 is IP68 rated, can be submerged into water.

Operating on 12VDC low voltage, oSignage™ X1 is a safety luminaries and is compatible with our 12 VDC QDriver™/XDriver™ LED Power Supply. (Please visit http://www.atgelectronics.com/lighting/lighting10_20.html for more information.)

If a dynamic lighting is required, oSignage™ X1 can also be connected with specified dimmer (QColor™ Remote Dimmer).

oSignage™ X1 is well employed for countless proposes such as lighting channel and reverse-channel letters, signs, billboard or advertising board, besides, oSignage™ X1 is also the ideal products for under-cabinet lighting, emergency exit lighting and decoration lighting. It has been successfully used in homes, hotels, restaurants, stores, shops and clubs etc.

Feature & Benefits:

Easy installation with 36 pcs modules per string, every 3 pcs per cut;

High brightness and light efficiency with high power LEDs adopting American chips;

Easy installation with 3M double-sided sticking tape;

Long life span of 50,000 hours with little heat, high quality LEDs and proper drive characteristics;

IP68 degree, ideal for indoor and outdoor applications;

Safety and stable with low voltage (12VDC);

Energy saving with low power consumption.

Recommended Applications:

Signage lighting (channel letter lighting, reverse channel letter lighting, signage back lighting etc) for your business purpose;

Under-cabinet lighting for your cabinets, cupboards etc in your homes, restaurant and any other places where you need a task lighting;

Decoration lighting (cove lighting, architecture lighting) for your homes, hotels, restaurants, stores, shops, clubs, bars etc.

Custom Design Service:

Colors: red, yellow, blue, green, white, pink, violet etc;

Working Voltage: 24 VDC available as per request.

Part Numbers

Technical Specifications

Physical Specifications

Electrical Specifications

Optical Specifications

* Color Temperature: 5,000~6,500K

ATG Dimmable High Power LED Lamps

eLucent™ RX Series LED Lamps

Innovative Lighting and Energy Solutions eLucent™ RX Series LED Lamps, are dimmable retrofit solutions for incandescent lamps and CFL lamps.
The dimmable function enables saving energy to be so easy, which makes eLucent™ RX Series warmly-welcomed by home, retail, commercial, and hospitality applications.
The large aluminum housing is the perfect shape for optimal heat dissipation and ensures long life-span.
eLucent™ R30X is equivalent up to a 75 watt incandescent, and eLucent™ R38X is equivalent up to a 100 watt incandescent, but uses up to 90% less energy and lasts up to 50 times longer.
eLucent™ RX Series contain no hazardous substances (e.g. lead, mercury), totally pollution and poisoning free.

Features:

Dimmable on all standard commercial dimmers;
Ultra energy efficient, up to 90% energy-saving;
Optimal heat dissipation with special-designed aluminum housing;
No mercury, lead, less CO2 emission, eco-friendly to the environment;
No UV, infrared output, no harmful to human body;
High shock and vibration resistant with durable aluminum housing;
Solid-state, fast turn on;
Less heat output, no heat damage;
Easily installed into standard fitting;
Longevity of service and minimal maintenance.

Recommended Applications:

General and down lighting for home, retail, commercial and hospitality applications.

Your Wise Choice: eLucent™ RX Series

Note: This sheet only lists those LED replacement lamps sellable and useable for North American market.

With patented thermal control technology, and special designed aluminum alloy housing substantially achieves good thermal property. With this unique design, eLucent™ GX1019 is of much more stable performance and of course will last for around 50,000 hours compared to 1,000 hours from incandescent lamps and 5,000 to 10,000 hours from CFLs.

eLucent™ GX1019 adopt powerful LED light source with standard MR16, GU10, E27 base, which can be easily dropped into the existing sockets.

eLucent™ GX1019 offer green and high efficiency illumination lighting solutions. They have many advantages against incandescent light bulbs such as energy-saving, pollution-free, long life span etc. With so many benefits, eLucent™ GX1019 are gradually replacing the conventional light bulbs for homes, offices, museums, galleries, shop windows, casinos, bars, restaurants, hotels, malls, exhibitions, and meeting rooms etc.

Features & Benefits:

Good thermal property with special designed aluminum alloy housing;

High brightness with powerful LED light source to achieve the illumination purpose;

High shock and vibration resistant with aluminum body;

Low power consumption, save energy and maintenance cost;

Low heat generation, no heat damage to achieve ideal display lighting;

Solid-state, fast turn on;

Easy installation with existing socket;

Low heat generation, no heat damage.

Recommended Applications:

Illumination lighting for homes, offices, restaurants, hotels, malls, casinos, bars etc;

Display lighting for museums, galleries, stores, malls, shop windows, exhibitions, etc.

eLucent™ GX1019 XPower LED Lamps are ideal replacement lamps for display lighting, especially in museums, galleries and other places where UV, IR or heat radiation is undesirable. You needn’t be worried that your articles will suffer from light damages. Especially for the valuable articles such as jewelries and antiques etc, avoiding the light damages is of great importance.

Electrical Specifications

Optical Specifications

Comparison between ATG Electronics ® eLucent™ GX1019 XPower LED Lamp with Halogen Lamp

Ultra Thin, Ultra Bright!

Next generation solution to replace conventional fluorescent light.

With a tube diameter of just 16mm (0.625 inch), they are special suitable for applications in low-profile fixtures, such as those used for cove lighting and illuminating display cases.

Compact Size

Compact size, with the same light output as comparable T8 lamps but up to 50 % smaller

They are rather suitable when using in confined space or rooms with lower ceilings. They distribute lumen output uniformly and achieve comfortable light effect.

High Reliability

iBright™ E25i are more reliable, as
1) they are made of high quality SMD LEDs, with low light decrease and good heat dissipation;
2) they are using specially designed aluminum housing with good heat dissipation, and have no heat buildup inside;
3) they are using specially designed loop circuit, one LED fail won’t make the whole fluorescent light fail.

Higher Efficacy

iBright™ E25i are using high quality SMD LEDs, of high efficacy (typical 90lm/w).

They are well-suited for use anywhere, offices, galleries, shop windows, hotels, meeting rooms and especially low temperature areas, just like conventional fluorescent lights. Just choose iBright™ E25i for general illumination, task lighting, display lighting and back lighting.

CE Certified & UL Complied

iBright™ E25i are tested with listed standards and found in compliance with the council EMC directive 2004/108/EC and LVD directive 2006/95/EC.

The external power supplies used are CE and UL certified and class II listed, supplying 36VDC (max.), which compiles to UL subjects 1598 & 8750.

Energy saving and low maintenance costs

iBright™ E25i lowers running costs and eliminates the hassle of repeated relamping in busy areas like offices, factories and supermarkets. The energy-efficient iBright™ E25i keeps on burning for up to 50,000 hours significantly reducing the time spent on replacing defective lamps.

Energy prices are rising, and lighting accounts for more than 25% of a supermarket’s energy bill. iBright™ E25i enables energy savings of up to 80% while maintaining the same light level.

Recommended Applications

General illumination for homes, offices, restaurants, hotels, malls, buses, trains, warehouses, parking lots etc;
Task lighting for cabinets, cupboards etc in your homes, restaurants, and kitchens or any other places where accent lighting is required.
Retail display lighting for the articles in your stores and shops;
Back lighting for square billboards or advertisement boards.

1. Base upon 24hrs per day, 365 days per year, US$0.25/kWh for electricity.
2. Unit price for conventional fluorescent light is U$5, change every year.
3. US$8 per lamp change for maintenance costs.

Higher Reliability

iBright™ I38i are more reliable, as 1) they are made of high quality SMD LEDs, with low light decrease and good heat dissipation; 2) they are using specially designed aluminum housing with good heat dissipation, and have no heat buildup inside; and 3) they are using specially designed loop circuit, one LED fail won’t make the whole fluorescent light fail.

Easier Retrofit

iBright™ I38i can directly be placed into any existing T8 socket. Just remove starter and disconnect the ballast in the fixture.

Higher Efficacy

iBright™ I38i are using high quality SMD LEDs, of high efficacy (typical 90lm/w).

They are well-suited for use anywhere, offices, galleries, shop windows, hotels, meeting rooms and especially low temperature areas, just like conventional fluorescent lights. Just choose iBright™ I38i for general illumination, task lighting, display lighting and back lighting.

*1. Base upon 24hrs per day, 365 days per year, US $0.25/kWh for electricity.

2. Unit price for conventional fluorescent light is US $5, change every year.
3. US $8 per lamp change for maintenance costs.

Energy saving and low maintenance costs

iBright™ I38i lowers running costs and eliminates the hassle of repeated relamping in busy areas like offices, factories and supermarkets. The energy-efficient iBright™ I38i keeps on burning for up to 50,000 hours significantly reducing the time spent on replacing defective lamps.

Energy prices are rising, and lighting accounts for more than 25% of a supermarket’s energy bill. iBright™ I38i enables energy savings of up to 80% while maintaining the same light level.

I48i T8 LED Tube

More vision comfortable and higher brightness, why not iBright™ I48i?

Innovative Lighting and Energy Solutions  iBright™ I48i T8 LED Tubes are the most qualified replacements for conventional fluorescent T8 on the current market. Milky Lens makes iBright™ I48i emit very eye-comfortable light without any light spots. Meanwhile they adopt a quite number of SMD LEDs as lighting source, which maintains competitive brightness.

Besides, power supply of iBright™ I48i is placed inside, which much eases the installation. They are well-suited for retail, commercial lighting and widely used to many shopping malls, supermarkets, offices, restaurant etc.

Features:

-Even color and non-glare beams;

-Higher Brightness (Max. 1800lm);

-Most qualified replacements for conventional fluorescent;

-Easier retrofit with integrated power supply;

-50% Energy saving;

-Good light quality and good heat dissipation;

-Minimum maintenance costs;

-Green and eco-friendly lighting source without mercury.

Ordering Information

Technical Specifications
Physical Specifications

Electrical Specifications

Optical Specifications

X30T RGB

LED Wall Washers

X30T RGB LED Wall Washer is ideal for indoor decorative lighting. It is the perfect solution for dynamic illumination of the walls in your homes, hotels, clubs, mansions, theaters, casinos, shopping centers etc.

Smart™ X30T comes with two control methods: self-control and DMX control. Under self-control, it will work under the pre-programmed lighting effect; while under DMX control, Smart™ X30T will be compatible with any DMX512 console to meet lighting designers’ specific lighting-effect requirements.

Features & Benefits:

With the dimension of L1000 * W76 * H163 (mm), it can achieve a wide area illumination;

Emit higher brightness at lower cost with 30pcs of ultra bright LEDs (1 W);

Each Red, Green, Blue LED has a 256 color depth and can provide a total amount of 16,777,216 different colors;
With mounting gears and rotating for your easy installation and removal;

Ease of directing the light to the right spot with 180° rotary angle;

RGB color-changing modes controlled by our DMX controller to get fancy performance;

Indoor use, applicable for dry environment;

Long life span of over 50,000 hours with high quality LEDs.

Recommended Applications:

Indoor wash lighting (stage lighting, background lighting) for special events, concerts, clubs, hotels, theaters.

Custom Design Service:

Colors: red, yellow, blue, green, white, pink and violet etc.  Operation Voltage: 24VDC available as per request

iBright™ G5 LED T8

This solution enables installer a quick retrofit and saves much in labor cost.

iBright™ G5 is available in IPS (internal power supply) and EPS (external power supply) versions. For IPS version, it integrates high-efficiency and long-life built-in power supply, input voltage 120VAC; for EPS version, it comes with UL listed external power supply, input voltage 100-277VAC.

The lamp adopts 5050 SMD LED diodes, and clear lens to maximize lumen output.

The lamp can produce equivalent illuminance as fluorescent tube while save more than 50% energy.

For heat management, the lamp uses patented and proven solution, which can dissipate heat from LED chip to air quickly and efficiently.

Without heat buildup, it makes reliable and optimizes performance and life span of the lamp.

iBright™ G5 length is available in 2ft, 4ft and 5ft.

iBright G5 IPS Specifications
Physical Specifications

iBright G5 IPS Specifications

Physical Specifications

Electrical Specifications

Optical Specifications